XRAY NT1 2017 Spec 1/10 Luxury Nitro Touring Car Kit

XRA330013

Νέο προϊόν

Since the first release of the NT1 back in 2007, it has enjoyed some of the greatest successes around the world, and been one of the most popular nitro touring cars around. The success of the NT1 has been the result of ongoing development and improvement based on feedback from Team XRAY and customers worldwide.

1 Αντικείμενο

525,00 €

Check out the detailed & beautiful presentation of the new XRAY NT1'17 at: https://teamxray.com/nt1/2017/

click to enlarge
(click to enlarge)

show.php?img_id=0&crt=cfcd208495d565ef66
• All-new chassis features stiffer area under rear suspension for increased stability, larger openings under front suspension for increased forward traction. An additional opening (matching the flywheel opening) has been added to the other side of the chassis for equal side flex.

• All-new redesigned aluminum rear bulkheads for improved flex characteristics of the rear suspension.

• All-new redesigned aluminum rear upper clamps work with new rear bulkheads and offer increased durability.

• All-new redesigned aluminum rear - front 1-piece suspension holder allows mounting of the rear bulkheads into the holder for improved flex of the rear suspension. The holder is now inserted into the chassis for better centering.

• All-new redesigned aluminum rear 2-speed shaft bulkheads lower the rear 2-speed shaft to decrease the CG of the rotating parts.

• All-new graphite reinforcement plate connects the rear 2-speed shaft bulkheads for improved stability.

• All-new thicker graphite rear shock tower improves high-speed steering. Body posts are mounted on the shock tower wider for increased stability.

• All-new thicker graphite roll-center bridge removes unwanted flex of the rear suspension and improved cornering speed.

• All-new updated aluminum upper arm holders offer improved flex of the front suspension and forward traction.

• All-new softer upper suspension arms offer improved in-corner steering and increased forward traction.

• Upgraded steel pivot balls allow increased steering angle for better cornering speed and out-of-corner steering.

• All-new redesigned aluminum radio plate mounts are now mounted to the chassis equidistant from the the chassis centerline, and inline for more equal chassis flex characteristics.

• All-new relocated side-belt tensioner mounts directly to the aluminum radio plate holder to reduce wear.

• All-new redesigned graphite radio plate offers improved in-corner steering, improved front suspension flex, and improved forward traction.

• All-new graphite rear stiffener works with the new repositioned aluminum radio plate mounts to increase stability. Replaces the previous link.

• All-new redesigned engine mounts offer improved and more equal chassis flex under the engine area.

• All-new brake pad material for smoother, more consistent braking and better braking feeling.
• All-new redesigned rear lower pivot pins work with adjustable rear wheelbase.

• All-new adjustable rear wheelbase allows 2mm rearward relocation of the rear arms for improved traction.

• All-new 2.0mm softer front anti-roll bar wire is included in the kit for improved in-corner steering.

• Improved flex of the front & rear suspensions.

click to enlarge
(click to enlarge)

Chassisshow.php?img_id=0&crt=cfcd208495d565ef66
The NT1 chassis has been completetely redesigned to work with the new aluminum suspension flex system. The area under the rear suspension is stiffer for improved stability. The aluminum rear-front 1-piece suspension holder is inserted into the chassis for better centering. The cutouts under the arm area allows the use of the lower roll-center position without arm modification. 

The chassis is 2mm longer to allow adjustment of the rear wheelbase, which allows the arms to be moved rearward for improved traction.
The new 2-speed layshaft rear bulkheads fit inside the chassis for better and more precise placement and alignment. An extra third attachment point on the layshaft rear bulkheds allows even greater reinforcement of the layshaft area.

click to enlarge
(click to enlarge)

show.php?img_id=0&crt=cfcd208495d565ef66
The new chassis has a larger opening under the front suspension area for better forward traction and improved steering characteristics.

The engine area of the chassis has been redesigned as well. The matching opening for the flywheel opening has been added to the other side of the chassis for equal flex. Unneeded cooling cutouts under the engine area has been removed, giving better reinforcement in the engine area. 

The redesigned chassis offer improved performance in corners and provides superior stability. The chassis is 2mm narrower overall to increase chassis flex and generate more traction and steering. The narrower chassis also prevents chassis contact during cornering, and helps to eliminate the car ‘stopping‘ in mid-corner. 

click to enlarge
(click to enlarge)

Aluminum Backbone.show.php?img_id=0&crt=cfcd208495d565ef66
The main backbone of the car consists of high-precision, high-strenghth aluminum bulkheads and aluminum suspension holders mounted to the aluminum chassis. 

All bulkhead parts are CNC-machined from premium Swiss 7075 T6 aluminum and have been designed to provide the lightest and strongest possible support framework for the car with maximum flex characteristics to increase the traction. 

The bulkheads are anodized in a distinctive orange color. XRAY’s legendary attention to detail is noticeable in all the precisely chamfered edges. (Color may vary slightly between products.)

click to enlarge
(click to enlarge)

Rear Bulkheadsshow.php?img_id=0&crt=cfcd208495d565ef66
The aluminum rear bulkheads have been completely redesigned. The mounting positions to the chassis below the 2-speed axle were removed, and the bulkheads are now mounted into the rear-front suspension holder for improved flex characteristics and traction. The bulkheads have special cutouts for precise centering into the rear-front suspension holder.

click to enlarge
(click to enlarge)

Rear Upper Clampsshow.php?img_id=0&crt=cfcd208495d565ef66
New aluminum rear upper clamps were redesigned to work with the new rear bulkheads, and offer increased durability.

The clamps hold the rear shock tower as well as the graphite roll-center bridge. For extra roll-center adjustment, the graphite roll-center bridge can be removed and the rear linkage can be mounted directly to the upper clamps to improve cornering speed and steering in very high-traction conditions.

The super-lightweight clamps have a very clean and lightweight design to create the lowest weight and CG, making the NT1 easy to service and retaining easy access to all parts. 

The rear upper clamps are CNC-machined from premium Swiss 7075 T6 aluminum to provide the lightest & strongest support framework for the car.

click to enlarge
(click to enlarge)

Upper Arm Holdersshow.php?img_id=0&crt=cfcd208495d565ef66
Redesigned front upper arm holders not to touch front bulkheads, offering improved flex of the front suspension, and better forward traction.

click to enlarge
(click to enlarge)

Middle Shaft Holdershow.php?img_id=0&crt=cfcd208495d565ef66
The new aluminum front middle shaft holder is now inserted into the chassis for better centering.

The smart design allows easier access to the front belt and pulley for quick & easy front belt changes and maintenance. 

The muffler mounting system is incorporated into the front middle shaft holder. This design helps to ensure that the muffler is mounted independently from the radio plate and chassis so there is no flex transfer. The extra-long muffler wire fits all standard mufflers.

click to enlarge
(click to enlarge)

Radio Plate Mountsshow.php?img_id=0&crt=cfcd208495d565ef66
All-new radio plate mounts are made from Swiss 7075 T6 aluminum instead of composite material for improved flex characteristics. The mounts are now located equidistant from the center centerline, as well as inline for more equal chassis flex characteristics.

click to enlarge
(click to enlarge)

2-Speed Bulkheadsshow.php?img_id=0&crt=cfcd208495d565ef66
The new 2-speed layshaft rear bulkheads were redesigned to fit inside of the chassis for better and more precise placement. The bulkheads have an extra mounting position – 3 screws instead of 2 – for even greater reinforcement of the rear layshaft area and improved on-power stability. The new bulkheads are an integral part of the chassis Multi-Flex™ system that offers the choice of different flex adjustments.

The new 2-speed layshaft rear bulkheads allow lower mounting of the 2-speed shaft to decrease the CG of the rotating parts. 

click to enlarge
(click to enlarge)

Radio Plateshow.php?img_id=0&crt=cfcd208495d565ef66
A new radio plate design allows mounting of the plate on the new equidistant, aligned aluminum radio plate mounts for more equal chassis flex characteristics. 

The front part of the radio plate was redesigned for improved in-corner steering, as well as improved flex of the front suspension for better forward traction.

Front Multi-Flex™ adjustment via the radio plate bushing in the servo saver area is a very useful feature. When the bushing is installed, the fixed setting is activated; when the bushing is removed, the screw is directly mounted on the servo saver post and the whole front suspension has increased flex. The fixed setting is recommended when there is sufficient in-corner steering. To increase the in-corner steering, the flex setting can be easily adjusted. 

click to enlarge
(click to enlarge)

Rear Suspension Multi-Flex™.show.php?img_id=0&crt=cfcd208495d565ef66
The rear suspension design features Multi-Flex™ quick adjustment to easily adapt the handling of the car to particular track conditions and tires used. There are 2 different flex characteristics to choose from:

• SOFT – Graphite brace is not used. This allows flex in the rear suspension and generates more rear traction. Recommended for low traction tracks, or races with spec hard or large tires. 

• STIFF - Graphite brace is connected to the 2-speed bulkheads. This setting reduces flex in the rear suspension and improves out-of-corner steering and rotation, but also slightly decreases rear traction. Recommended for medium-high-traction tracks, or when tires with additive are used.

click to enlarge
(click to enlarge)

Shock Towersshow.php?img_id=0&crt=cfcd208495d565ef66
All-new graphite rear shock tower is machined from thicker graphite 3.5 material for improved high-speed steering. Body posts are mounted wider on the shock tower for better stability.

Machined from premium grade 2.5mm (front) and 3.5mm (rear) graphite, the shock towers are small and lightweight. The well-proven shock mounting positions remain unchanged. 

click to enlarge
(click to enlarge)

Rear Graphite Stiffenershow.php?img_id=0&crt=cfcd208495d565ef66
The redesigned rear stiffener made from 2mm graphite material works with the new aluminum radio plate mounts. The graphite stiffener replaces the previous link for increased stability. 

The rear graphite stiffener was designed to enhance the flex characteristics around the engine area. The brace is mounted on the right side between the 2-speed bulkhead and the adjacent aluminum radio plate mount. The graphite stiffener provides optimized flex characteristics and can be easily removed when extra steering needed. An optional rear stiffener link is available to offer an in-between stiffness setting. 

click to enlarge
(click to enlarge)

Roll-Center Bridgeshow.php?img_id=0&crt=cfcd208495d565ef66
New graphite roll-center bridge made from thicker 4mm material removes unwanted flex of the rear suspension and improves cornering speed.

The roll-center bridge features six roll-center positions for the rear upper linkage (identical to previous versions). 

click to enlarge
(click to enlarge)

Brake Systemshow.php?img_id=0&crt=cfcd208495d565ef66
The brake pads are made from the new SLS material for smoother, more consistent braking.

Brake inputs are transferred precisely to the brakes by the ball-raced, super-smooth brake cam. The steel brake cam is machined from self-developed HUDY Spring Steel™ to ensure the longest possible lifespan, maximum strength, and lowest weight. Brake pad backing plates are made from laser-cut steel.

The laser-cut, precision flat-ground ventilated steel brake disk allows for true, wobble-free rotation. 

click to enlarge
(click to enlarge)

Lower Suspension Mountsshow.php?img_id=0&crt=cfcd208495d565ef66
The aluminum rear-front 1-piece suspension holder was redesigned to allow mounting of the rear bulkheads into the holder for improved flex of the rear suspension. The 1-piece holder is now inserted into the chassis for a better centering.

Front suspension holders are fully independent from the bulkheads, mounted directly to the chassis to increase traction and make the car easier to drive. 

Suspension mounts were redesigned to retain the NT1’s well-proven geometry. The mounting positions on the chassis were established to achieve the best possible flex characteristics for maximum traction and steering characteristics.

click to enlarge
(click to enlarge)

Suspension Armsshow.php?img_id=0&crt=cfcd208495d565ef66
New front upper arms are made from softer material for improved in-corner steering and better forward traction.

The NT1 suspension arms are the result of long-term testing of different designs and layouts. Length, thickness, flexibility, geometry of suspension points and materials used… these are all the concepts and details that had to be thoroughly reviewed to create optimal suspension arms.

The exclusive composite mixture used for suspension arms is a perfect balance between reliability and performance. The suspension arm itself is rigid enough to provide a responsive feel, yet soft enough to provide extreme durability.

click to enlarge
(click to enlarge)

Pivot Pinsshow.php?img_id=0&crt=cfcd208495d565ef66
New rear lower pivot pins are now longer to allow adjustment of the rear wheelbase by moving the rear lower arms 2mm rearward that increases the rear traction and stability of the car.

click to enlarge
(click to enlarge)

Pivot Ballsshow.php?img_id=0&crt=cfcd208495d565ef66
New front steel suspension pivot balls have a smaller diameter between the ball and thread to allow an increase in steering angle for increased cornering speed and out-of-corner steering.

The NT1 pivot ball suspension contains precision pivot balls which are specially hardened for enhanced lifespan and to withstand hard crashes. A total of eight (8) pivot balls are included, captured by strong M10 composite nuts to minimize weight and give smooth suspension movement.

Standard pivot balls are made from steel for maximum durability and lifespan. Optional lightweight aluminum or titanium pivot balls are also available.

click to enlarge
(click to enlarge)

Belt Tensionershow.php?img_id=0&crt=cfcd208495d565ef66
New adjustable side-belt tensioner is now mounted directly to the aluminum radio plate holder instead of graphite mount that eliminates wear.

click to enlarge
(click to enlarge)

Front Wire Anti-roll Barshow.php?img_id=0&crt=cfcd208495d565ef66
An all-new 2.0mm (softer) front anti-roll bar wire is included for improved in-corner steering.

The NT1 includes both wire & blade-style front anti-roll bars for freedom of choice based on track conditions.

The wire anti-roll bar is used to increase steering response on small, technical tracks. The wire anti-roll bar is mounted to the bulkheads from the outside to allow quick & easy changes and adjustment. The wire roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height can be quickly & easily adjusted.

click to enlarge
(click to enlarge)

Engine Mountsshow.php?img_id=0&crt=cfcd208495d565ef66
All-new redesigned engine mounts offer improved and more equal chassis flex under the engine area.

Δεν υπάρχουν κριτικές πελατών προς το παρόν.

Γράψτε μια κριτική

XRAY NT1 2017 Spec 1/10 Luxury Nitro Touring Car Kit

XRAY NT1 2017 Spec 1/10 Luxury Nitro Touring Car Kit

Since the first release of the NT1 back in 2007, it has enjoyed some of the greatest successes around the world, and been one of the most popular nitro touring cars around. The success of the NT1 has been the result of ongoing development and improvement based on feedback from Team XRAY and customers worldwide.

75,00 €
0 Σχόλιο(α)
Bag - Transport - HARD Cheng-Ho 1/10 Hauler (2 boxes)
14,80 €
0 Σχόλιο(α)
AA Glo-Starter Red with 1800mAH Batterie
22,00 €
0 Σχόλιο(α)
Racing Experience Hot Fire EURO 25% Nitro Off Road Fuel